Plastic barrel wall thickness of the main factors to ensure its performance

 

     For plastic barrel, the wall thickness of the product and its distribution is to ensure that the performance of the main factors. Different thickness have different rules, such as minimum wall thickness can not appear in the product line at the bottom of the mold and to give full consideration to the wall thickness distribution of the product, set different wall thickness at different positions in order to ensure a certain standard of product weight and meet the performance requirements under the premise.

     Under normal circumstances the parting line at the bottom of the barrel plastic barrels should be the thickest, minimum wall thickness should be in the corner portion of the product, but generally should be lower than the bottom corner to corner at the top of thicker; the thickness of the lower portion of the product should be higher than the upper part to be bigger. Products can be decided according to the difference between the wall thickness or wall thickness of the symmetric parts than to test the thickness uniformity of the product, if the assessment symmetric parts wall thickness ratio of 1: 1.5 should be the upper limit.

     Simple, Shandong plastic bucket is good or not mainly depends on the quality of the wall thickness, the mouth end face, mouth opening height and screw cap with the degree structure.